What Is Die Casting Flash Trimming and Why Is It Important for Part Quality?
► Flash is a thin fin of aluminium formed at the parting line, gate, vent or ejector pin locations when […]
May 2026
Gravity Die Casting Delivers Better Surface Finish Than Sand Casting: A Process Comparison
► Gravity die casting (GDC) using permanent metal dies achieves as-cast surface roughness of Ra 3 to 6 micrometres, versus
How to Request a Sample Part from an Aluminium Die Casting Manufacturer in Pune
► Plasma Aluminium Diecasting provides first-article samples within 6 to 10 weeks of drawing freeze and tooling PO — covering
Top Industries Using Aluminium Die Casting in Pune: Applications by Sector
► Automotive and two-wheeler manufacturing is the largest end-use sector for aluminium die casting in Pune, accounting for approximately 60
How Low Pressure Die Casting Achieves Better Mechanical Properties Than HPDC for Structural Parts
► LPDC fills the die from below using controlled gas pressure (0.5 to 1.0 bar) on the melt surface, producing
Why Tooling Cost Is a One-Time Investment That Saves Money at Volume
► Die casting tooling is a capital investment, not a consumable — the die is paid for once and produces
How to Inspect Aluminium Die Cast Parts for Quality: A Practical Guide for Buyers
► Dimensional inspection of aluminium die cast parts should cover all print-critical dimensions using calibrated gauges or CMM, with Cpk
What Is Squeeze Casting and How Does It Compare to HPDC Aluminium Die Casting?
► Squeeze casting applies high pressure (70 to 140 MPa) to liquid or semi-solid aluminium metal in a die cavity,
How Aluminium Die Casting Reduces Vehicle Weight and Improves Fuel Efficiency
► Aluminium’s density is 2.71 g/cm3 compared to cast iron at 7.2 g/cm3 — a die cast aluminium part weighs